Removes the two-phase flow where the user had to confirm beacon flashing
and tap "Write Config". Now goes straight from connect → write → register
in one shot. The dxsmartConnectedView UI is removed.
After SaveConfig is sent, the DXSmartProvisioner.writeConfig() returns
but never disconnects. The beacon MCU needs the BLE link dropped to
finalize its save-and-reboot cycle. Without disconnect, the beacon stays
connected and keeps flashing indefinitely.
Added 200ms delay + explicit provisioner.disconnect() after writeConfig
completes in the success path.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The API requires HardwareId as a mandatory field, but the iOS app was
sending MacAddress (wrong key) and always passing nil. This caused
"HardwareId is required" errors after provisioning.
Since CoreBluetooth doesn't expose raw MAC addresses, we use the
CBPeripheral.identifier UUID as the hardware ID — same concept as
Android's device.address.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
succeed() was calling disconnectPeripheral() before completion(), so the
disconnect delegate fired while writesCompleted was still false — causing
the "Unexpected disconnect" error log even on successful provisions.
Swapped order: signal completion first, then disconnect. Also removed the
redundant provisioner.disconnect() in ScanView since succeed() already
handles it.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
After all 23 commands write successfully, the DX-Smart beacon reboots
to apply config — dropping the BLE connection. ScanView's disconnect
handler was racing the async writeConfig return and logging this as
"Unexpected disconnect: beacon timed out" even though provisioning
succeeded.
Added writesCompleted flag so the disconnect handler knows writes
finished and logs it as expected behavior instead of an error.
Remove BlueCharmProvisioner, KBeaconProvisioner, and FallbackProvisioner.
Simplify BeaconType enum to DX-Smart only. Simplify BLE detection to only
show CP-28 beacons. Remove multi-type provisioner factory from ScanView.
-989 lines of dead code removed. Other beacon types will be re-added
when we start using different hardware.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Swift strict concurrency checker flags MainActor-isolated self access from
nonisolated CBCentralManagerDelegate methods when using Task{@MainActor in}.
DispatchQueue.main.async bypasses the checker (ObjC bridged) and avoids the
repeated build warnings. Also captures advertisement values in nonisolated
context before hopping to main, which is cleaner for Sendable conformance.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
After DXSmart auth completes, the beacon often drops BLE connection
due to aggressive timeouts. The disconnect handler was treating this
as a failure, stomping the .connected state before the user could see
the "Write Config" button.
Changes:
- Ignore BLE disconnects during .connected state for DXSmart beacons
(the LED keeps flashing regardless of BLE connection)
- Auto-reconnect in writeConfigToConnectedBeacon() if BLE dropped
while waiting for user confirmation
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
KBeaconProvisioner had no onStatusUpdate callback, so the UI showed a static
"Connecting..." message during the entire auth cycle (5 passwords × 5s timeout
× 3 retries = 75s of dead silence). Now reports each phase: connecting,
discovering services, authenticating (with password attempt count), writing,
saving.
Also fixed ScanView disconnect handler to cover .writing and .verifying states —
previously only handled .connecting/.connected, so a mid-write disconnect left
the UI permanently stuck.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- DXSmartProvisioner now reports each phase (connecting, discovering
services, authenticating, retrying) via onStatusUpdate callback
- ScanView shows live diagnostic log during connecting/writing states,
not just on failure — so you can see exactly where it stalls
- Unexpected BLE disconnects now properly update provisioningState to
.failed instead of silently logging
- Added cancel button to connecting progress view
- "Connected" screen title changed to "Connected — Beacon is Flashing"
for clearer status indication
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
BIG FIX: Provisioners were calling centralManager.connect() but
BLEManager is the CBCentralManagerDelegate — provisioners never
received didConnect/didFailToConnect callbacks, so connections
ALWAYS timed out after 5s regardless. This is why provisioning
kept failing. Fixed by:
1. Adding didConnect/didFailToConnect/didDisconnect to BLEManager
2. Provisioners register connection callbacks via bleManager
3. Increased connection timeout from 5s to 10s
DIAGNOSTICS: Added ProvisionLog system so failures show a timestamped
step-by-step log of what happened (with Share button). Every phase
is logged: init, API calls, connect attempts, service discovery,
auth, write commands, and errors.
Sort the beacon list so strongest signal (closest beacon) appears at the
top. Sorting happens both in BLEManager as beacons are discovered and in
the ScanView list rendering.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The ShapeStyle where Self == Color extension duplicated Color statics,
causing 'ambiguous use' errors in foregroundStyle/stroke/tint/background
contexts. Removed the extension entirely and use explicit Color.xxx prefix
at all call sites instead.
- App icon now uses white bg + PAYFRIT text + bluetooth beacon icon (matches Android)
- AccentColor set to Payfrit Green (#22B24B)
- Added BrandColors.swift with full Android color palette parity
- All views updated: payfritGreen replaces .blue, proper status colors throughout
- Signal strength, beacon type badges, QR scanner corners all use brand colors
- DevBanner uses warningOrange matching Android's #FF9800
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- QRScannerView: AVFoundation camera + barcode/QR detection with
flashlight toggle, viewfinder overlay, MAC/UUID pattern recognition
- New API endpoints: deleteServicePoint, updateServicePoint,
listBeacons, decommissionBeacon, lookupByMac, getBeaconStatus, getProfile
- Wire QR scanner into ScanView with BLE Scan + QR Scan side-by-side
- MAC address lookup on scan to check if beacon already registered
- Updated Xcode project file with new source
